Nitecore MT26 Multi-Task Flashlight

Availability: Ships in 1-2 days
Brand: Nitecore

The MT26 may be smaller than most high-output flashlights, but it offers a good output of 960 lumens. There are two modes of this multi-task light: turbo and user-defined, which can be programmed for just about any kind of situation. The light is in Turbo mode with the head tightened to the full. In this mode, the light can produce its full 960 lumens of output and allows for momentary output with the tailcap switch. The light is triggered momentarily by a half-press and a full press (click) gives constant output. The MT26 uses a CREE XM-L2 led powered by two CR123 or 1 18650 batteries and is impact resistant up to 4.9 feet, and IPX-8 water resistant. The light goes into the user specified mode with the head loosened by about a half turn. Switching the cycles of light on and off through the various outputs: high, medium, low, SOS and strobe. When the light is switched on, the last output level you pick (after keeping the light off for over 2 seconds) will remain. Tightening the head will bring the light back into Turbo mode at any time.


  • Intelligent memory functions
  • Reverse polarity protection
  • Two rapid switching modes suit various user requirements.
  • Anti-rolling functions


Max Output : 960 lumens
Max Beam Distance : 256 m
Max Beam Intensity : 16400 cd
Max Run time : 45 h 0 m / 1.88 d
Reflector : SMO
Battery : 1 × 18650, 2 × CR123
Special Modes : SOS, Strobe
Length : 149 mm / 5.87 in
Head Size : 34 mm / 1.34 in
Weight : 133 g / 4.69 oz
Feature : Tail Stand
Activity : Gear, Hunting, Law Enforcement, Military, Outdoor/Camping


Head Size:34 mm
Max Beam Distance:256 m
Lumens:500 - 999 lumens
FlashlightBeamIntensity:16,400 cd
FlashlightLED:CREE XM-L2 T6
Max Beam Distance:200 - 299 m

Write a review

How do you feel about this item?